No data found

Close

Categories

Testimonials Testimonials

950D111 RE 385 Metal Geared Motor 11:1

Write a review
£14.83
(£17.80 UK, incl VAT)
Price in points: 2966 points
1450-102
146 g
In stock
+ −
Add to wish list

MFA Como Drills 950D111

Output rpm at:

4.5V = 429
6V = 572
9V = 858
12V = 1145
15V = 1430
Output theoretical torque (g/cm) at 12V, max efficiency = 718, stall torque 4594

 

1450-100 to 106 Motor Performance (Note: 1450-107 to 113 Similar)
Nominal Voltage Current (A) Torque (g/cm) Speed (rpm) Efficiency (%) O/P Power (W)
12 0.155 0 11000   No Load
12 0.837 65.3 9821 61.85 max 6.21
12   417.6 Stall 0   0

No posts found

Write a review

As I intend using RE385 11:1 at 7.2 v in my model, what ESC would you recommend I need to purchase from you to operate this from my remote control receiver?

Asked by Dyfed | 22/10/2013, 21:56 | 1 answer(s)

I urgently need wheels for this particular motor, (RE 385 Metal Gearbox 11:1), which fits the shaft and has a diameter of at least 7cm. I can't find a '6T' wheel under the which wheels tab anywhere. Any help greatly appreciated.

Asked by Ben Christensen | 05/08/2012, 12:30 | 1 answer(s)
New post

Customers also bought....

MFA Plastic Gear 15T
4600-002
MFA Plastic Gear 15T
£0.37 (£0.44 UK, incl VAT)
4600-002
15 Tooth, 16.2mm OD x 5.8mm with 2.9mm bore.
In stock
MFA Plastic Gear 20T
4600-003
MFA Plastic Gear 20T
£0.39 (£0.47 UK, incl VAT)
4600-003
20 Tooth, 22mm OD x 6.3mm with 2.9mm bore.
In stock
MFA Plastic Gear 10T
4600-001
MFA Plastic Gear 10T
£0.34 (£0.41 UK, incl VAT)
4600-001
10 Tooth, 11.2mm OD x 5.8mm with 2.9mm bore.
In stock
Plastic Rack MOD 1, 6x6x50mm
4600-020
Plastic Rack MOD 1, 6x6x50mm
£0.49 (£0.59 UK, incl VAT)
4600-020
MOD 1 plastic rack 50mm long x 6mm x 6mm.
In stock
Plastic Worm Drive
4600-030
Plastic Worm Drive
£0.45 (£0.54 UK, incl VAT)
4600-030
A MOD 1 worm, Diameter 11.94mm x 32mm long with a 2.9mm bore.
In stock