Testimonials Testimonials

3D Printer M6 x 26mm Nozzle Throat

£1.32
(£1.58 incl VAT)
7110-201
In stock
+

This threaded adaptor is used for joining the hot end heated block to the hot end body. It is threaded M6 and is 26mm overall length. The bore is 2mm and thus only suitable for 1.75mm filament.

No FAQ found

Customers also bought....

7110-305
£1.87 (£2.24 incl VAT)
7110-305
This is the business end of the hot end - the nozzle. This particular model is available in three sizes, 0.2, 0.3 & 0.4mm and all for 1.75mm filament....
In stock

7110-302
£1.75 (£2.10 incl VAT)
7110-302
This is the heater block for the hot end into which you screw in the nozzle, insert the heater and temperature thermistor sensor and the throat adaptor....
In stock

7110-308
£1.75 (£2.10 incl VAT)
7110-308
This heater block is based on the Makerbot Mk7 / Mk8 concept. It is supplied complete with a grub screw to retain the heater in place. Size:...
In stock

7110-010
£0.39 (£0.47 incl VAT)
7110-010
This 100k thermistor is commonly used in 3D printers as the temperature sensor for the nozzle. With a 1.7mm body diameter and a length of just 3.2mm makes...
In stock

7110-304
£1.64 (£1.97 incl VAT)
7110-304
This is the business end of the hot end - the nozzle. This particular model is available in three sizes, 0.2, 0.3 & 0.4mm and all for 1.75mm filament....
In stock