3D Printer Hardware

Various mechanical products used in the construction of 3D printers

£1.32 (£1.58 incl VAT)
7110-201
This threaded adaptor is used for joining the hot end heated block to the hot end body. It is threaded M6 and is 26mm overall length. The bore is 2mm and...
8 item(s)
End of line
+

£1.75 (£2.10 incl VAT)
7110-302
This is the heater block for the hot end into which you screw in the nozzle, insert the heater and temperature thermistor sensor and the throat adaptor....
6 item(s)
End of line
+

£1.17 (£1.40 incl VAT)
7110-303
This is the business end of the hot end - the nozzle. This particular model is available in three sizes, 0.2, 0.3 & 0.4mm and all for 1.75mm filament....
7 item(s)
End of line
+

£1.64 (£1.97 incl VAT)
7110-304
This is the business end of the hot end - the nozzle. This particular model is available in three sizes, 0.2, 0.3 & 0.4mm and all for 1.75mm filament....
7 item(s)
End of line
+

£1.87 (£2.24 incl VAT)
7110-305
This is the business end of the hot end - the nozzle. This particular model is available in three sizes, 0.2, 0.3 & 0.4mm and all for 1.75mm filament....
5 item(s)
End of line
+

£2.10 (£2.52 incl VAT)
7110-401
In order to feed the filament into the nozzle, you need a stepper motor driven drive 'gear'. This drive gear is made from stainless steel and has a serrated...
5 item(s)
End of line
+

£1.20 (£1.44 incl VAT)
7110-220
A brass sleeve that some builders prefer to use over other bearing types. Use only with hardened chomed steel shafts and some lubricant is likley to be...
17 item(s)
End of line
+

£18.70 (£22.44 incl VAT)
7110-306
An Aluminium J-Head Hot End which is rated for temperatures up to 300 degrees Celsius making it suitable for materials with higher extruding temperatures...
3 item(s)
End of line
+

£1.75 (£2.10 incl VAT)
7110-308
This heater block is based on the Makerbot Mk7 / Mk8 concept. It is supplied complete with a grub screw to retain the heater in place. Size:...
2 item(s)
End of line
+

£12.39 (£14.87 incl VAT)
7110-309
This design of extrusion head popularised by Ultimaker simplifies the XY drive by having both axis drive stepper motors fixed to the chassis frame rather...
2 item(s)
End of line
+

£1.17 (£1.40 incl VAT)
7110-402
In order to feed the filament into the nozzle, you need a stepper motor driven drive 'gear'. This drive gear is made from brass with sharp teeth to bite...
1 item(s)
End of line
+

£7.25 (£8.70 incl VAT)
7110-340
RepRap mendel PCB Heatbed MK2B with led / resistor and cable for Mendel 3D printer hot bed and similar 3D printers. Links...
4 item(s)
End of line
+