Testimonials Testimonials

3D Printer GT2 20T Pulley with Grub Srew Fixings

£1.72
(£2.06 incl VAT)
7110-103
Currently Unavailable
No date for new stocks

Many 3D printers are now moving from T2.5 pitch timing pullys / belts to GT2. A common size pulley is this 20 tooth (we also have 16 tooth pulleys and pulley kits available as well).

For 3D Printing applications, GT2 2mm belt system works better than T5, T2.5 as it gives better smoothness and accuracy of positioning, resulting in better printing quality. In general, GT2 timing belt systems are especially suited for linear movement and positioning applications so can be used for your DIY pick and place machine as well.

  • Bore: 5mm
  • Fixing: 2 x M3 Grub Screws
  • Overall Length: 16mm
  • Boss Diameter:16mm
  • For Belt Width: 6 to 7mm

No FAQ found

7110-102
£3.03 (£3.64 incl VAT)
7110-102
Many 3D printers are now moving from T2.5 pitch timing pullys / belts to GT2. A common size pulley is this 16 tooth (we also have 20 tooth pulleys and...
In stock

7110-101
£6.23 (£7.48 incl VAT)
7110-101
Many 3D printers are now moving from T2.5 pitch timing pullys / belts to GT2. This set includes two 20 tooth pulleys and 2 metres of open length belt. This...
Currently Unavailable
No date for new stocks

7110-104
£1.72 (£2.06 incl VAT)
7110-104
Many 3D printers are now moving from T2.5 pitch timing pullys / belts to GT2. For 3D Printing applications, GT2 2mm belt system works better than T5,...
In stock

Customers also bought....

7110-104
£1.72 (£2.06 incl VAT)
7110-104
Many 3D printers are now moving from T2.5 pitch timing pullys / belts to GT2. For 3D Printing applications, GT2 2mm belt system works better than T5,...
In stock

7110-101
£6.23 (£7.48 incl VAT)
7110-101
Many 3D printers are now moving from T2.5 pitch timing pullys / belts to GT2. This set includes two 20 tooth pulleys and 2 metres of open length belt. This...
Currently Unavailable
No date for new stocks

7110-501
£0.26 £0.13 (£0.16 incl VAT)
7110-501
When we use A4988 or A 4983 based stepper motor drivers, we prefer to fix on one of these heatsinks otherwise the driver can cut out on over-temp especially...
46 item(s)
End of line

1402-039
£16.46 (£19.75 incl VAT)
1402-039
This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1000 mA at 2.7 V, allowing for a...
In stock

1518-010
£7.06 (£8.47 incl VAT)
1518-010
The original version of the DRV8825 stepper motor driver carrier has been replaced by this newer version that can more easily be used as a drop-in...
In stock