Testimonials Testimonials

3D Printer GT2 16T Pulley with Grub Srew Fixings

£3.03
(£3.64 incl VAT)
7110-102
In stock
+

Many 3D printers are now moving from T2.5 pitch timing pullys / belts to GT2. A common size pulley is this 16 tooth (we also have 20 tooth pulleys and pulley kits available as well).

For 3D Printing applications, GT2 2mm belt system works better than T5, T2.5 as it gives better smoothness and accuracy of positioning, resulting in better printing quality. In general, GT2 timing belt systems are especially suited for linear movement and positioning applications so can be used for your DIY pick and place machine as well.

  • Bore: 5mm
  • Fixing: 2 x M3 Grub Screws
  • Overall Length: 14mm
  • Boss Diameter:13mm
  • For Belt Width: 6mm

No FAQ found

7110-101
£6.23 (£7.48 incl VAT)
7110-101
Many 3D printers are now moving from T2.5 pitch timing pullys / belts to GT2. This set includes two 20 tooth pulleys and 2 metres of open length belt. This...
Currently Unavailable
No date for new stocks

7110-103
£1.72 (£2.06 incl VAT)
7110-103
Many 3D printers are now moving from T2.5 pitch timing pullys / belts to GT2. A common size pulley is this 20 tooth (we also have 16 tooth pulleys and...
Currently Unavailable
No date for new stocks

7110-104
£1.72 (£2.06 incl VAT)
7110-104
Many 3D printers are now moving from T2.5 pitch timing pullys / belts to GT2. For 3D Printing applications, GT2 2mm belt system works better than T5,...
In stock

Customers also bought....

7110-104
£1.72 (£2.06 incl VAT)
7110-104
Many 3D printers are now moving from T2.5 pitch timing pullys / belts to GT2. For 3D Printing applications, GT2 2mm belt system works better than T5,...
In stock

1441-030
£4.42 £2.21 (£2.65 incl VAT)
1441-030
This black sprayed alloy steel heavy duty angle bracket is suitable for all NEMA 17 stepper motors (See Related Products). Size: L54mm x W50mm x H54mm
40 item(s)
End of line

4308-206
£0.38 £0.19 (£0.23 incl VAT)
4308-206
A pack of 10 M6 Nylon 66 washers suitable for where insulated fixings are required or corrosive conditions.
12 item(s)
End of line

7110-402
£1.17 £0.59 (£0.71 incl VAT)
7110-402
In order to feed the filament into the nozzle, you need a stepper motor driven drive 'gear'. This drive gear is made from brass with sharp teeth to bite...
1 item(s)
End of line

1518-007
£4.68 (£5.62 incl VAT)
1518-007
The A4988 stepper motor driver carrier is a breakout board for Allegro's easy-to-use A4988 microstepping bipolar stepper motor driver. It is a direct...
In stock