3D Printer Electronics

£1.71 (£2.05 incl VAT)
7110-020
A 1m long K-type thermocouple cold end surface temperature sensor terminated in a lug for easy surface mounting. Model: K-02 Temperature range:...
8 item(s)
End of line
+

£0.39 (£0.47 incl VAT)
7110-010
This 100k thermistor is commonly used in 3D printers as the temperature sensor for the nozzle. With a 1.7mm body diameter and a length of just 3.2mm makes...
47 item(s)
End of line
+

£1.09 (£1.31 incl VAT)
7110-002
A microswitch based limit switch module for use when detecting end of travel on your 3D printer or other X, Y, Z platform. Supplied ready assembled with...
12 item(s)
End of line
+

£1.04 (£1.25 incl VAT)
7110-001
An opto coupled limit switch module for use when detecting end of travel on your 3D printer or other X, Y, Z platform. Supplied ready assembled and includes...
14 item(s)
End of line
+

£0.94 (£1.13 incl VAT)
7110-600
We bought these leads without fully checking what connector was fitted so we ended up with something we were not expecting. No doubt they are for some type...
10 item(s)
End of line
+

£16.36 (£19.63 incl VAT)
7110-564
This module makes managing both the use and setting up of your 3D printer so much easier by having an all-in-one units that contains a 20x4 green LCD, SD...
4 item(s)
End of line
+

£13.09 (£15.71 incl VAT)
7110-563
This module makes managing both the use and setting up of your 3D printer so much easier by having an all-in-one units that contains a graphic 128x64 pixel...
4 item(s)
End of line
+

£10.52 (£12.62 incl VAT)
7110-562
This module makes managing both the use and setting up of your 3D printer so much easier by having an all-in-one units that contains a 20x4 blue LCD, SD...
3 item(s)
End of line
+

£7.60 (£9.12 incl VAT)
7110-560
This shield is for the Arduino Mega or clone controllers and provides the expansion ports needed for a typical 3D printer. It will take up to 5 'Pololu'...
3 item(s)
End of line
+

£0.26 (£0.31 incl VAT)
7110-501
When we use A4988 or A 4983 based stepper motor drivers, we prefer to fix on one of these heatsinks otherwise the driver can cut out on over-temp especially...
60 item(s)
End of line
+