Testimonials Testimonials

Save 49%

3D Printer 100k Thermistor NTC 3950

List price: $0.47
$0.24
($0.29 incl VAT) You save: $0.23 (49%)
7110-010
43 item(s)
End of line
+

This 100k thermistor is commonly used in 3D printers as the temperature sensor for the nozzle. With a 1.7mm body diameter and a length of just 3.2mm makes this a very tiny sensor that can be inserted into a hole in the nozzle block.

Spec:

  • Nominal Resistance Value at 25 Deg C: 100k+/- 1%
  • B Value (calculated from resistance between 15 & 50 Deg C: 3950 +/- 1%
  • Temperature Range: -50 to +260 Deg C

No FAQ found

Customers also bought....

3801-185
$1.13 $0.57 ($0.68 incl VAT)
3801-185
The LT positive temperature coefficient temperature sensing resistor is trimmed to specification on latest equipment. The case construction is epoxy coated...
Currently Unavailable
Discontinued Product

7110-002
$1.32 $0.66 ($0.80 incl VAT)
7110-002
A microswitch based limit switch module for use when detecting end of travel on your 3D printer or other X, Y, Z platform. Supplied ready assembled with...
9 item(s)
End of line

7110-201
$1.59 $0.80 ($0.95 incl VAT)
7110-201
This threaded adaptor is used for joining the hot end heated block to the hot end body. It is threaded M6 and is 26mm overall length. The bore is 2mm and...
8 item(s)
End of line

7110-304
$1.98 $0.99 ($1.18 incl VAT)
7110-304
This is the business end of the hot end - the nozzle. This particular model is available in three sizes, 0.2, 0.3 & 0.4mm and all for 1.75mm filament....
7 item(s)
End of line

7110-308
$2.11 $1.06 ($1.28 incl VAT)
7110-308
This heater block is based on the Makerbot Mk7 / Mk8 concept. It is supplied complete with a grub screw to retain the heater in place. Size:...
2 item(s)
End of line