Testimonials Testimonials

3D Printer 100k Thermistor NTC 3950

£0.39
(£0.47 incl VAT)
7110-010
In stock
+

This 100k thermistor is commonly used in 3D printers as the temperature sensor for the nozzle. With a 1.7mm body diameter and a length of just 3.2mm makes this a very tiny sensor that can be inserted into a hole in the nozzle block.

Spec:

  • Nominal Resistance Value at 25 Deg C: 100k+/- 1%
  • B Value (calculated from resistance between 15 & 50 Deg C: 3950 +/- 1%
  • Temperature Range: -50 to +260 Deg C

No FAQ found

Customers also bought....

1064-102
£0.56 (£0.67 incl VAT)
1064-102
This 6" (15cm) cable has two 26AWG stranded conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which...
In stock
Price in points: 113 points

3801-185
£0.94 (£1.13 incl VAT)
3801-185
The LT positive temperature coefficient temperature sensing resistor is trimmed to specification on latest equipment. The case construction is epoxy coated...
In stock
Price in points: 188 points

7110-002
£1.09 (£1.31 incl VAT)
7110-002
A microswitch based limit switch module for use when detecting end of travel on your 3D printer or other X, Y, Z platform. Supplied ready assembled with...
In stock

7110-201
£1.32 (£1.58 incl VAT)
7110-201
This threaded adaptor is used for joining the hot end heated block to the hot end body. It is threaded M6 and is 26mm overall length. The bore is 2mm and...
In stock

7110-304
£1.64 (£1.97 incl VAT)
7110-304
This is the business end of the hot end - the nozzle. This particular model is available in three sizes, 0.2, 0.3 & 0.4mm and all for 1.75mm filament....
In stock