Testimonials Testimonials

3D Printer 0.3mm Nozzle M6 x 7mmAF x 8mm

£1.64
(£1.97 incl VAT)
7110-304
7 item(s)
End of line
+

This is the business end of the hot end - the nozzle. This particular model is available in three sizes, 0.2, 0.3 & 0.4mm and all for 1.75mm filament.

Made from brass, the nozzles have a M6 thread to match our heater blocks. The hex body is 7mm across flats and the length is 8mm excluding the threaded portion.

No FAQ found

7110-303
£1.17 (£1.40 incl VAT)
7110-303
This is the business end of the hot end - the nozzle. This particular model is available in three sizes, 0.2, 0.3 & 0.4mm and all for 1.75mm filament....
7 item(s)
End of line

7110-305
£1.87 (£2.24 incl VAT)
7110-305
This is the business end of the hot end - the nozzle. This particular model is available in three sizes, 0.2, 0.3 & 0.4mm and all for 1.75mm filament....
5 item(s)
End of line

Customers also bought....

7110-010
£0.39 (£0.47 incl VAT)
7110-010
This 100k thermistor is commonly used in 3D printers as the temperature sensor for the nozzle. With a 1.7mm body diameter and a length of just 3.2mm makes...
47 item(s)
End of line

7110-201
£1.32 (£1.58 incl VAT)
7110-201
This threaded adaptor is used for joining the hot end heated block to the hot end body. It is threaded M6 and is 26mm overall length. The bore is 2mm and...
8 item(s)
End of line

7110-308
£1.75 (£2.10 incl VAT)
7110-308
This heater block is based on the Makerbot Mk7 / Mk8 concept. It is supplied complete with a grub screw to retain the heater in place. Size:...
2 item(s)
End of line