This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 500 mA at 10 V, allowing for a holding torque of 1000 g-cm (14 oz-in). The motor has four color-coded wires terminated with bare leads. Our 5mm universal mounting hub can be used to mount objects on the stepper motor’s 5mm-diameter output shaft.

Specifications

• Size: 35 mm square x 28 mm, not including the shaft (NEMA 14)
• Weight: 140 g (5 oz)
• Shaft diameter: 5 mm
• Steps per revolution: 200
• Current rating: 500 mA per coil
• Voltage rating: 10 V
• Resistance: 20 Ohm per coil
• Holding torque: 1000 g-cm (14 oz-in)
• Inductance: 13.5 mH per coil
• Lead length: 12 in

Dimensions

The dimensions diagram above shows the stepper motor dimensions in mm. The dimension labeled “length” is 28 mm. The output shaft has a length of 21 mm and a diameter of 5 mm.

Stepper Motor Applications

Stepper motors are generally used in a variety of applications where precise position control is desirable and the cost or complexity of a feedback control system is unwarranted. Here are a few applications where stepper motors are often found:

• Printers
• CNC machines
• 3D printer/prototyping machines
• Laser cutters
• Pick and place machines
• Linear actuators
• Hard drives