The serial enabled LCD backpack allows you to control a parallel based LCD over a single-wire serial interface. The SerLCD backpack takes care of all the HD44780 commands allowing seamless integration with any micro that can communicate over a wide range of TTL serial baud rates. The SerLCD currently supports 16 and 20 character wide screens with 2 or 4 lines of display.

Communication with SerLCD requires 5V TTL serial at a default baud rate of 9600bps (8-N-1). You can adjust the baud to any standard rate between 2400 and 38400bps. The power, ground and RX pins are all broken out to a 3.5mm pitch screw terminal.

SerLCD has the ability to dim the backlight to conserve power if needed. There is also a potentiometer on the backpack to adjust the contrast.

Features:

* New PIC 16F688 utilizes onboard UART for greater communication accuracy
* Adjustable baud rates of 2400, 4800, 9600 (default), 14400, 19200 and 38400
* Operational Backspace
* Greater processing speed at 10MHz
* Incoming buffer stores up to 80 characters
* Backlight transistor can handle up to 1A
* Pulse width modulation of backlight allows direct control of backlight brightness and current consumption
* All surface mount design allows a backpack that is half the size of the original
* Faster boot-up time
* Boot-up display can be turned on/off via firmware
* User definable splash screen

Dimensions: 14 x 45 mm