Save 67%

Serial Enabled 16x2 LCD Black on Green

List price: £22.59
£7.53
(£9.04 UK, incl VAT) You save: £15.06 (67%)
Price in points: 1506 points
2109-314
40 g
1 item(s)
End of Line
+
Add to wish list
This is the latest evolution of the Sparkfun LCD-09393 serial LCD. Included on a single board is a 16x2 LCD and an embedded circuit based around a PIC 16F88. The on-board PIC takes a TTL serial input and prints the characters it receives onto the LCD. The installed firmware also allows for a number of special commands so you can clear the screen, adjust the backlight brightness, turn the display on/off, and more.

Communication with SerLCD requires 5V TTL serial at a default baud rate of 9600bps (8-N-1). You can adjust the baud to any standard rate between 2400 and 38400bps. The power (VDD), ground (GND) and RX pins are all broken out to both a 0.1" pitch header as well as a 3-pin JST connector.

SerLCD has the ability to dim the backlight to conserve power if needed. There is also a potentiometer on the back of the display to adjust the contrast.

Features:

* Embedded PIC 16F88 utilizes onboard UART for greater communication accuracy
* Adjustable baud rates of 2400, 4800, 9600 (default), 14400, 19200 and 38400
* Operational Backspace
* Greater processing speed at 10MHz
* Incoming buffer stores up to 80 characters
* Backlight transistor can handle up to 1A
* Pulse width modulation of backlight allows direct control of backlight brightness and current consumption
* All surface mount design allows a backpack that is half the size of the original
* Faster boot-up time
* Boot-up display can be turned on/off via firmware
* User definable splash screen

Dimensions:

* PCB: 103x36mm
* LCD: 71.4x26.4mm

 

Customers also bought....

1151-062
£0.74 £0.37 (£0.44 UK, incl VAT)
1151-062
1.2mm yellow flexible polyolefin heat shrink sleeving for insulation and cable marking etc.. Shrink ratio 2:1 Also available in black, red,...
18 item(s)
End of Line

Minimum quantity for "Heatshrink 1.2m Pack, Yellow 1.5mm Unshrunk Diameter" is 2.


1151-063
£0.74 £0.37 (£0.44 UK, incl VAT)
1151-063
1.2mm blue flexible polyolefin heat shrink sleeving for insulation and cable marking etc.. Shrink ratio 2:1 Also available in black, red,...
23 item(s)
End of Line

Minimum quantity for "Heatshrink 1.2m Pack, Blue 1.5mm Unshrunk Diameter" is 2.


1151-085
£1.08 £0.54 (£0.65 UK, incl VAT)
1151-085
7.0mm black flexible polyolefin heat shrink sleeving for insulation and cable marking etc.. Shrink ratio 2:1 Also available in black,...
7 item(s)
End of Line

1151-086
£1.08 £0.54 (£0.65 UK, incl VAT)
1151-086
7.0mm red flexible polyolefin heat shrink sleeving for insulation and cable marking etc.. Shrink ratio 2:1 Also available in black, red, yellow, blue...
24 item(s)
End of Line

1151-090
£1.20 £0.60 (£0.72 UK, incl VAT)
1151-090
9.0mm black flexible polyolefin heat shrink sleeving for insulation and cable marking etc.. Shrink ratio 2:1 Also available in black, red,...
26 item(s)
End of Line