Timing Belts

We have three types of timing pulley belt, the Synchroflex range covers from T2.5 to AT10. We also stock the popular MFA range of T5x10mm belts that are slightly heavier duty than the equivalent Synchroflex T5x10mm.

Our latest addition is also the smallest, the MXL025 rubber belt Rubber back/teeth, glass fibre reinforced, nylon fabric tooth facing to DIN / ISO 5296 which are only for our MXL025 timing pulley.


The Synchroflex range of belts consists of two components, a wear resistant Contilan carcass, and high grade endless galvanized steel wire tension members. The excellent nobd between the two results in a belt with high tooth load capacity combined with low elastic elongation, making them unsurpassed for quality and accuracy. The Synchroflex process produces close tolerance timing belts to ensure optimum mesh in all power ranges. Synchroflex belts comply with DIN7721, having proved themselves for over 30 years.

• Slipless, synchronous operation
• Constant length, no post elongation
• Reduced noise
• Extremely wear resistant
• Efficiencies up to 98%
• Maintenance free
• Belt speeds up to 80 m/sec
• Temperature range -10ºC to +80ºC
• Temporarily higher (+120ºC)
• Chemically stable
• Chemically resistant to ozone and sunlight
• Conditionally resistant to acids and alkalis
• Resistant to fats and petrol
• Extremely oil resistant
• Hydrolysis resistant
• Large power range
• Low initial tension
• High positional and angular accuracy
• Can be welded to other thermoplastics
• Low mass, suitable for positioning
and stepper motor drives




Just a few of the companies Technobots are an official distributor for: