Loading...

 We have over 700 end of line + a few over stocked items available at discounted prices even lower discounted prices - whilst stocks last. Look out for the them as you browse, download a complete PDF list or visit this page. We simply do not want to transport them to our new premises and re-stock them again!


Electronics Project Bare PCB / Breakout Boards

Breakout PCB's for various projects and modules.


SOIC to DIP Adapter 8-Pin

Part No.: 2900-625

Shipping Weight: 0.45 g.

£1.52 (£1.82 inc tax)
In stock
Description: Your basic SOIC break out boards. What's the difference? The 8 Pin board is TINY. And you can't beat the price! These are custom PCB boards... Read More
304 Techno Points

SOIC to DIP Adapter 28-Pin

Part No.: 2900-621

Shipping Weight: 1.91 g.

£1.52 (£1.82 inc tax)
In stock
Description: Low-cost basic SOIC break out boards. These are custom PCB boards that interface standard SOIC devices to standard .1" headers.... Read More
304 Techno Points

SSOP to DIP Adapter 8-Pin

Part No.: 2900-616

Shipping Weight: 0.50 g.

£1.52 (£1.82 inc tax)
In stock
Description: 8-Pin SSOP to DIP break out board. The footprint was rotated to accommodate different width SSOP devices and can be used with 8 pin SSOPs.... Read More
304 Techno Points

SSOP to DIP Adapter 20-Pin

Part No.: 2900-618

Shipping Weight: 1.41 g.

£1.52 (£1.82 inc tax)
In stock
Description: 8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be used... Read More
304 Techno Points

SSOP to DIP Adapter 28-Pin

Part No.: 2900-626

Shipping Weight: 1.86 g.

£1.52 (£1.82 inc tax)
In stock
Description: 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be used with any pin count... Read More
304 Techno Points

SOT23 to DIP Adapter

Part No.: 2900-622

Shipping Weight: 0.23 g.

£0.53 (£0.64 inc tax)
In stock
Description: 6 pin SOT-23 to DIP adaptor. Created to take SOT23 of various pin sizes breakout to DIP. This will work with 3-pin MOSFETs, BJTs, Voltage... Read More
106 Techno Points

AVR Programming Adapter

Part No.: 2900-619

Shipping Weight: 1.23 g.

£0.80 (£0.96 inc tax)
In stock
Description: This is a simple, but extremely handy board to adapt the common 10-pin ISP programmers to the smaller 6-pin ISP connections. We also designed... Read More
160 Techno Points

ATX Connector Breakout Board

Part No.: 2900-629

Shipping Weight: 4.00 g.

£3.76 (£4.51 inc tax)
In stock
Description: This is a breakout board for our right-angle, 24-pin ATX connector . Pair this board with the ATX connector and a standard PC power supply... Read More
752 Techno Points

MiniDIN 6-Pin Connector Breakout

Part No.: 2900-615

Shipping Weight: 0.82 g.

£0.76 (£0.91 inc tax)
In stock
Description: This is a bread board friendly breakout board for the MiniDIN-6 connector . Board brings out all 6 pins to a 0.1" spaced connector. Use this... Read More
152 Techno Points

RJ45 Ethernet MagJack Breakout

Part No.: 2900-628

Shipping Weight: 1.54 g.

£0.85 (£1.02 inc tax)
In stock
Description: If you need to get your MagJack into a breadboard, this is for you. This board exposes all pins, LEDs, and housing with breadboard friendly... Read More
170 Techno Points

RCA Jack Breakout

Part No.: 2900-617

Shipping Weight: 1.00 g.

£0.76 (£0.91 inc tax)
In stock
Description: Simple breakout board for the RCA phono connector . Use this breakout (shipped bare) to allow breadboard or SIP access to the super-common... Read More
152 Techno Points

ProtoBoard - Penta-shape

Part No.: 2900-627

Shipping Weight: 1.09 g.

£1.52 (£1.82 inc tax)
In stock
Description: Why not prototype in 3D? The SparkFun Penta-shape is a roughly 1" wide penta-shaped board with 0.1" spaced holes. Use it to create different... Read More
304 Techno Points

RFID Reader Breakout

Part No.: 2900-612

Shipping Weight: 1.82 g.

£0.76 (£0.91 inc tax)
In stock
Description: This is a simple breakout board for RFID readers. This board will bring the 2mm spaced pins out to two 0.1" spaced headers. You can solder... Read More
152 Techno Points

Rotary Encoder Breakout Board - Illuminated (RG/RGB)

Part No.: 2900-630

Shipping Weight: 1.00 g.

£2.50 (£3.00 inc tax)
In stock
Description: This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB... Read More
500 Techno Points

Sound Detector

Part No.: 2900-631

Shipping Weight: 6.00 g.

£8.14 (£9.77 inc tax)
In stock
The Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detector not only provides an audio output,... Read More

UV Sensor Breakout Board - ML8511

Part No.: 2900-632

Shipping Weight: 2.00 g.

£9.71 (£11.65 inc tax)
In stock
The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal... Read More

USB Type A Female Breakout Board

Part No.: 2900-633

Shipping Weight: 4.00 g.

£2.91 (£3.49 inc tax)
In stock
This simple board breaks out a female USB type A connector's VCC, GND, D- and D+ pins to a 0.1" pitch header. If you want to add a USB to  your... Read More

ISL29125 RGB Light Sensor

Part No.: 2900-634

Shipping Weight: 2.00 g.

£5.69 (£6.83 inc tax)
In stock
If you’ve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those measurements,... Read More

L298 Breakout Board Bare PCB

Part No.: 2900-600

Shipping Weight: 3.00 g.

£2.66 (£3.19 inc tax)
In stock
This is a breakout board from Sparkfun BOB-09540 for the L298N full-bridge dual motor driver; which comes in a staggered, Multiwatt package. All pins of the... Read More
532 Techno Points

Thumb Joystick Breakout Board Bare PCB

Part No.: 2900-601

Shipping Weight: 3.00 g.

£1.90 (£2.28 inc tax)
In stock
This is the breakout board from Sparkfun BOB-09110 for the thumb joystick (not included but available. Pins are broken out to a 0.1" header and includes 4... Read More
380 Techno Points

Microphone Preamp Breakout Board Bare PCB

Part No.: 2900-602

Shipping Weight: 4.00 g.

£2.66 (£3.19 inc tax)
In stock
This is a simple microphone preamplifier circuit board from Sparkfun PRT-08872 for a wide range of microphone types, with good pre-amplification to attach to... Read More
532 Techno Points

Gas Sensor Breakout Board Bare PCB

Part No.: 2900-603

Shipping Weight: 1.00 g.

£0.76 (£0.91 inc tax)
In stock
Simple breakout board from Sparkfun BOB-08891 for the MQ-2, MQ-3, MQ-4, MQ-6 and MQ-7 gas sensors. All you need is VCC at 5V, GND, and a resistor to an ADC,... Read More
152 Techno Points

Relay Control Breakout Board Bare PCB

Part No.: 2900-604

Shipping Weight: 5.00 g.

£3.03 (£3.64 inc tax)
In stock
Based on the Controllable Power Outlet Tutorial, this is the bare PCB from Sparkfun COM-09096 that allows you to switch high voltages with a simple 0 to 5V... Read More
606 Techno Points

WiiChuck Adaptor Bare PCB

Part No.: 2900-605

Shipping Weight: 1.00 g.

£1.99 (£2.39 inc tax)
In stock
The WiiChuck Adapter is a small PCB from Sparkfun DEV-09281 that is designed to be inserted into the connector of a Nintendo Wii Nunchuck to provide access... Read More
398 Techno Points

Pololu MQ Gas Sensor Carrier Bare PCB

Part No.: 2900-606

Shipping Weight: 1.00 g.

£1.06 (£1.27 inc tax)
In stock
This breakout board is designed to work with any of the MQ-series gas sensors, simplifying the interface from 6 to 3 pins - ground, +5V VCC, and an analog... Read More
212 Techno Points

Serial DB9 Breakout Board Bare PCB

Part No.: 2900-607

Shipping Weight: 2.00 g.

£1.06 (£1.27 inc tax)
In stock
A very simple breakout board for the DB9 connector from Sparkfun BOB-08552. Takes the 9 incoming signals and puts them into a breadboard friendly single row... Read More
212 Techno Points

Audio Jack Breakout Board Bare PCB

Part No.: 2900-608

Shipping Weight: 2.00 g.

£0.76 (£0.91 inc tax)
In stock
Simple breakout board from Sparkfun PRT-08827 for the 3.5mm audio jack. Use this breakout (shipped bare) to allow breadboard or SIP access to the... Read More
152 Techno Points

SOIC to DIP Adapter 20-Pin

Part No.: 2900-609

Shipping Weight: 1.36 g.

£1.52 (£1.82 inc tax)
In stock
Description: This is a low-cost, basic SOIC breakout boards. This custom PCB will interface a standard SOIC package IC to 0.1" headers, which are easier... Read More
304 Techno Points

SSOP to DIP Adapter 16-Pin

Part No.: 2900-610

Shipping Weight: 0.95 g.

£1.52 (£1.82 inc tax)
In stock
Description: 8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be used... Read More
304 Techno Points

USB Female Type B Vertical Breakout Board

Part No.: 2900-611

Shipping Weight: 0.95 g.

£0.76 (£0.91 inc tax)
In stock
Description: Simple breakout board for the USB Female Type B Vertical Connector. We primarily designed this board so that you could panel mount a USB... Read More
152 Techno Points

Breakout Board for Photo Interrupter CNZ1120

Part No.: 2900-620

Shipping Weight: 0.82 g.

£0.57 (£0.68 inc tax)
In stock
Description: A simple breakout PCB for the CNZ1120 Photo Interrupter. This PCB has three connections for PWR (3V-6V), GND, and Signal. When the gate is... Read More
114 Techno Points

Breakout Board for RJ45

Part No.: 2900-614

Shipping Weight: 0.91 g.

£0.76 (£0.91 inc tax)
In stock
Description: This is a small PCB that brings out the pins of the RJ45 connector to an in-line 0.1" footprint. Use with break-away headers for... Read More
152 Techno Points

Photo Interrupter GP1A57HRJ00F Breakout Board

Part No.: 2900-613

Shipping Weight: 0.91 g.

£1.14 (£1.37 inc tax)
In stock
Description: A simple breakout PCB for the GP1A57HR photo interrupter. This PCB has three connections for PWR, GND, and Signal. When the gate is clear,... Read More
228 Techno Points

 

Just a few of the companies Technobots are an official distributor for:
       Manufacturers