General RC Questions

"I bought a skysport 6 a number of years ago for a robot, 40meg with servos etc, can this be used on an electric plane Im building please ?.
Regards"

– Ian

"Being new to electric flight bit confused about the receiver with saturn 2.4 ghz rcs 6 channel. unable to find out which channels do what. Currently unable to get the motor running (kbm31/08). any help would be appreciated"

– Philip Gribble

"I have just purchased a Diesel sound simulator, I am using a Viper marine 15 speed control the instructions say i have to remove the red wire from the speed control lead if using an external battery supply. It says in the speed control instruction that i must remove the ESC lead from the receiver and plug a lead from the sound unit inits place. the wire from the sound unit still has the red write in its place will this damage the ESC? The original lead from the ESC then plugs into the sound unit, but the red wire will be disconnected, will this work?

hope you can help,

Steven J"

– Steven Johnson

"HI, I am a paintballer and Iam looking to set up a laser pointer so I can turn it on remotely up to 10 meters... can anyone please design me a circuit board including the transmitter and reciever ..With a full list of parts and tools needed, the only requirements are that it has to be small and the transmitter can control up to four lasers at once (the transmitter needs to be as small as possible) and can you please email me all information.

Thank You
Daniel Brown
db.brown83@googlemail.com
"

– Daniel Brown

"Hi
You've probably been asked this many times before but..
I have a full sized Dalek and have bought an electric wheelchair. I want to strip the wheelchair and use the motors for the drive. Should I use this or would motors and wheels from yourself be an easier option.
I also want to operate this and other features by remote control.
Servos are new to me and I don't understand the different types.
Do you have a "shopping list" I should start with
Thanks
Mike"

– Mike