Loading...

Next Shipping Day 3rd December

We are now in the process of moving Technobots 120 miles North to the Town of Rugby. You can still place orders on-line as normal but they will not be dispatched until after we re-open on the 3rd December

Machining Services

Our machine shop is also being re-located so we are unable to carry out machining modifications on gears, sprockets, pulleys etc. Any order placed which includes machining options is unlikely to be processed until mid December.


Gear Matching

Technobots FAQ » Transmission (Bearings, gears, sprockets & wheels) » Gear Matching « Previous Next »
Author Message
Robert Caruana (Finch)
Member
Username: Finch

Post Number: 1
Registered: 7-2009
Posted on Saturday, July 11, 2009 - 1:35 pm:    Edit Post    Move Post (Moderator/Admin Only)

I would like to know if the tooth of these gears match with each other. The pairs are:
This, Part No: 4600-008 with this, Part No: 4600-015, and
This, Part No: 4600-030 with this, Part No: 4600-015 .

Regards,

Robert.
Admin (Admin)
Board Administrator
Username: Admin

Post Number: 1084
Registered: 10-2004
Posted on Tuesday, July 14, 2009 - 7:53 am:    Edit Post    Move Post (Moderator/Admin Only)

Robert,

Gears of the same MOD will run together so 4600-008 & 015 are fine. 4600-030 is MOD 1 so you would need to use a MOD 0.5 work such as 4600-038.

 

Just a few of the companies Technobots are an official distributor for:
       Manufacturers