We are closed on Monday 27 May for a Spring Bank Holiday. Business as normal from Tuesday 28th.
DoubleSwitch plugs into a standard hobby radio control receiver as easily as a servo does. You connect the loads that you want to toggle using DoubleSwitch's wear resistant screw terminals. Depending on the channel you use, you will then be able to control the relays by moving your radio's control stick up or down, left or right, or another method you desire.
DoubleSwitch has a status LED on the bottom. The LED will light up when the relay switch is on, and vice versa. It will also tell you if your radio link is too weak by flashing repeatedly.
The relay is a double pole double throw switch. Its typical lifetime is 100,000 switching cycles, depending on how heavy a load you are using.
DoubleSwitch does not supply power at the screw terminals.
Max relay voltage: 240VAC
Max relay current: 8A @ 12VDC, 8A @ 240VAC.
Relay resistance: 100 m? max
3.5V to 5.5V operating voltage (on servo pigtail)
40mA typical draw from receiver
Control of powerful auxiliary weapons in RC combat.
Control of glow plugs in RC nitro vehicles.
Control of high powered lighting systems on large RC aircraft, boats, cars.
Control of domestic appliances and home automation.
Control of non-critical automotive electronics such as glow wire.
Control of nearly any application that can be toggled with a switch.