Loading...

Bugatti Motor

Technobots FAQ » Motors » Geared Motors over 100W » Bugatti Motor « Previous Next »
Author Message
James Hill (Hilljames9)
Member
Username: Hilljames9

Post Number: 1
Registered: 10-2007
Posted on Wednesday, October 10, 2007 - 4:11 pm:    Edit Post    Move Post (Moderator/Admin Only)

Hi.
I am looking to purchase a motor to drive a minature bugatti. I have
had a look around your web site and there seems to be several
possibilities.
I have attached some photos for you to have a look at and hope your
expertise will help me select the correct one.

Thank You.

James Hill
Admin (Admin)
Board Administrator
Username: Admin

Post Number: 600
Registered: 10-2004
Posted on Thursday, October 11, 2007 - 3:06 pm:    Edit Post    Move Post (Moderator/Admin Only)

James,

In order to help you select a motor, we need to know such things as vehicle weight, desired vehicle speed, wheel diameter, the geared reduction already on the Bugatti and are there any size restrictions. If you can let us know this, we will see what we have in our product range. BTW, saw the pics via EWmail, rather nice I must say. Are you sure you need a geared motor as the diff already looks to have a high reduction?
James Hill (Hilljames9)
Member
Username: Hilljames9

Post Number: 2
Registered: 10-2007
Posted on Thursday, October 11, 2007 - 4:13 pm:    Edit Post    Move Post (Moderator/Admin Only)

Thank you for your responce!
I estimate the weight to be around 30kg not including the battery or motor.
Being that is only for a child i would imagine 5-10 mph vould be satisfactory. The size on the actual tyre reads 3.25/3.00-8.
A direct drive motor would be better as i am restricted by how i can mount it. From the outer of the carcus to the centre of shaft would have to be a maximum of 50mm. The gear itself would have to be a maximum diameter of 24mm.
Thanks for your help
James
Admin (Admin)
Board Administrator
Username: Admin

Post Number: 603
Registered: 10-2004
Posted on Friday, October 12, 2007 - 9:14 pm:    Edit Post    Move Post (Moderator/Admin Only)

James,

I do not quite follow you, your car has a large gear on the rear axle of what most be 150 teeth. Are you planning to remove this?

 

Just a few of the companies Technobots are an official distributor for:
       Manufacturers