The ACCM3D has an onboard 3.3V LDO regulator, allowing you to power the board with 3.5V to 15V sources. You can also use this regulator to power an external microcontroller with up to 50mA. For operation as low as 2.0V, you can bypass the voltage regulator and choose your own operating voltage.

It is designed to fit in the DIP-16 form factor, making the DE-ACCM3D suitable for breadboarding, perfboarding, and insertion into standard chip sockets. To keep things as simple as possible, there are only 5 pins - two for power, and three for the X, Y and Z analog outputs.

Additional circuitry ensures that the product won't be damaged by reversed power connections.

Don't need a Z axis? Try the 5g ACCM or the 2g ACCM above.

Performance:
Tri axis ±3g sensing
333mV/g sensitivity at 3.3V
500Hz bandwidth
Accurately drives up to a 500? load
3.5V to 15V input using onboard regulator
2.0V to 3.6V input bypassing the regulator
Draws only 0.9mA!
Protective Features: Reverse voltage protection
Output short protection
Applications: Motion, tilt and slope measurement
Shock sensing
Position sensing